Skip to ContentHere, you'll find support for your Display Hub+.
Display Hub+
How do I check the connection of automation devices paired with the Display Hub+?
The connection strength for the automation devices connected to the Display Hub+ can be checked at any time to ensure your devices are properly communicating with your panel. To check the connection strength of automation devices connected to your Display Hub+, follow the steps below:
Tap the drop-down menu button to access the settings tray on the Display Hub+.
Tap Settings.
Tap Advanced Settings and enter your master code.
Tap System Tests.
Tap Z-Wave Tests.
Tap Z-Wave Test.
Tap Run next to each connected automation device. A successful test will result in a Pass and a time stamp will appear. If a device fails, ensure it is plugged in and powered on.