Skip to Content
Help Center
Door and Window SensorMy Door and Window Sensor is causing a false alarm

Door and Window Sensor

Here, you'll find support for your Door and Window Sensor.

My Door and Window Sensor is causing a false alarm

Try this solution

Verify the placement of the Door and Window Sensor

The Door and Window sensor is looking for a ¾ inch or greater separation between the transmitter and magnet for it to trigger an alarm. Check the following if your sensor has triggered a false alarm:

  • Ensure both the transmitter and magnet are still present on the door/window or frame

  • Be sure to verify when the door is closed that the arrows on the two pieces are perfectly aligned, within a thumb’s width and flush

  • Ensure there is no play (movement) in the door or window when it is closed

  • Ensure that the notches are lined up directly across from each other

Need more help?

Ask a different questionDoor and Window Sensor
Select a different product
On this page
© Frontpoint SupportSitemap
FacebookTwitterInstagram