Skip to Content
Help Center
Door and Window SensorMy Door and Window Sensor is showing as open on the Control Panel when it is actually closed

Door and Window Sensor

Here, you'll find support for your Door and Window Sensor.

My Door and Window Sensor is showing as open on the Control Panel when it is actually closed

Try this solution

Verify the placement of the Door and Window Sensor

This is typically caused by a mounting issue. Please check the following:

  • Ensure one piece is mounted on the door or window and the other piece is mounted on the frame

  • Ensure the arrows (or notches) on the transmitter and magnet are facing each other

  • The space between both the transmitter (larger piece) and magnet (smaller piece) should not exceed 3/4", or a thumbs width.

  • Check for any recess in the door/frame. Ensure both pieces are on the same plane

Need more help?

Ask a different questionDoor and Window Sensor
Select a different product
On this page
© Frontpoint SupportSitemap
FacebookTwitterInstagram