Skip to Content
Help Center
Door and Window SensorMy panel is randomly announcing that my Door or Window sensor is open

Door and Window Sensor

Here, you'll find support for your Door and Window Sensor.

My panel is randomly announcing that my Door or Window sensor is open

Try this solution

Verify the placement of the Door and Window Sensor

This is typically caused by a mounting issue. Please check the following:

  • Verify that the notches on both pieces are directly across from each other

  • Check to ensure the sensors are no further apart than 3/4" (the closer the better)

  • Check to ensure both sensors are flush with one another, no recess in the door or frame and on the same plane.

  • Ensure there is no play (movement) in the door or window when it is closed.

Need more help?

Ask a different questionDoor and Window Sensor
Select a different product
On this page
© Frontpoint SupportSitemap
FacebookTwitterInstagram