Skip to ContentHere, you'll find support for your Glass Break Sensor.
Glass Break Sensor
Glass Break Sensor User Guide
The Glass Break Sensor uses a microprocessor to “hear” the unique frequency of breaking glass within 20ft of the sensor. This makes it ideal for covering large open areas with multiple doors or windows without needing to buy a Door/Window Sensor for each one.
The below statuses will appear on your app and panel if there is an issue with your device:
Tamper
Cover is not set correctly on device. To fix, confirm the cover is securely connected.
Low battery
Battery is reaching end of life for the sensor. To fix, replace with 1 CR123A Lithium battery.
Malfunction
The sensor is not communicating properlywith your panel. Ensure that the battery tab has been removed.
Alarm
Sensor has detected the sound of panel glass breaking since the last time the system was armed.
| Physical | |
|---|---|
| Housing Dimensions | 4.1x2.3x1.0 inches (10.6x6.0x2.6 cm) |
| Weight with Battery | 2.75 ounzes (78g) |
| Mounting Fastener | #6 screws, anchors, VHB tape (all provided) |
| Environmental | |
|---|---|
| Operating Temperature | 32°F-120°F (0°-49°C |
| Maximum Humidity | 85% non-condensing relative humidity |
| Sensor | |
|---|---|
| Frequency | 319.5 MHz |
| Replacement Battery | One Panasonic CR123A |
| Nominal Battery Life | 3.5 years |
| Battery Voltage | 3.0 VDC (Nominal) 2.2 VDC (Low) |
| Current Draw | 20 mA (Maximum), 50uA (Quiescent) |
| Transmitted Indications | Low Battery, Tamper, Supervision, Alarm |
RE129: FCC, IC