Skip to Content
Help Center
Long Range Door and Window SensorMy Long-Range Door and Window sensor is showing as open on the Control Panel when it is actually closed

Long Range Door and Window Sensor

Here, you'll find support for Long Range Door and Window Sensor.

My Long-Range Door and Window sensor is showing as open on the Control Panel when it is actually closed

Try this solution

Make sure the sensor is correctly mounted

  • Ensure that the two pieces are aligned properly. Arrows on both the transmitter and magnet should be directly across from each other

  • Both pieces should be as close together as possible, no further than 3/4" apart

  • Ensure there is no recess on the door/frame. Both magnet and transmitter should be flush with each other, on the same plane

Need more help?

Ask a different questionLong Range Door and Window Sensor
Select a different product
On this page
© Frontpoint SupportSitemap
FacebookTwitterInstagram