Skip to Content
Help Center
Long Range Door and Window SensorMy panel is randomly announcing that the door or window is open

Long Range Door and Window Sensor

Here, you'll find support for Long Range Door and Window Sensor.

My panel is randomly announcing that the door or window is open

Try this solution

Make sure the sensor is correctly mounted

This issue is generally due to an alignment issue between the transmitter and magnet, or that there is play in the door or window.

  • Verify that the arrows on the two pieces are aligned properly with the arrows directly across from each other

  • Ensure the two pieces are no further than a thumb's width apart from one another (3/4")

  • Check for a recession in the door/window frame. Both pieces should be on the same plane with each other

  • Be sure there is no play (movement) in the door or window when it is closed

Need more help?

Ask a different questionLong Range Door and Window Sensor
Select a different product
On this page
© Frontpoint SupportSitemap
FacebookTwitterInstagram