Perimeter Guard uses our advanced Video Analytics to sound an alert and flash the camera's status LED when unwanted visitors are detected.

Set Up Perimeter Guard with the Frontpoint app:

1. Log into the Frontpoint App.

2. Tap Video.

3. Tap the Gear icon for Settings.

4. Tap Recording Rules.

5. Tap on an existing Video Analytics rule, or create a new one.

6. Verify the initial Video Analytics settings are configured as desired, and then Tap Next.

7. Under Activate Perimeter Guard:

   • To enable the LED response:

     • Tap the Camera Status LED toggle to enable the LED response.

     • Using the Duration dropdown menu, select how long the LED response lasts.

• To enable the Camera Audio Alert:

  • Tap the Camera Audio Alert toggle to enable the Audio Alert.

  • Using the Audio Sound dropdown menu, select type of sound the camera makes.

  • Adjust the volume using the Volume slider.

Only the most current Outdoor Camera and Indoor Camera will have the Audio Alert menu available

• Using the Set Minimum Delay Between Alerts dropdown menu, select the desired amount of time the camera should not start a new alert after a previous alert has completed.

8.Tap Save.