Skip to Content
Help Center
Wireless Doorbell Camera & Smart ChimeInstalling the micro-SD Card into your camera

Wireless Doorbell Camera & Smart Chime

Here, you'll find support for your Wireless Doorbell Camera & Smart Chime.

Installing the micro-SD Card into your camera

Identify your camera from the picture:

If your camera is not pictured below, it's unfortunately not compatible with SD Card Continuous Recording due to hardware limitations.

  1. Insert the micro-SD Card into the slot on the bottom of the camera.
    ​

  1. Loosen the four screws on the bottom of the camera.

  2. Pull the cover away from the camera (it will not detach from the camera).

  3. Insert the micro-SD Card into the slot on the bottom of the camera.
    ​

  4. Re-install the cover and tighten the two screws.

  1. Loosen the two screws on the bottom of the camera.

    ​

  2. Pull the cover away from the camera (it will not detach from the camera).​

  3. Insert the micro-SD Card into the slot on the bottom of the camera.
    ​

  4. Re-install the cover and tighten the two screws.

Need more help?

Ask a different questionWireless Doorbell Camera & Smart Chime
Select a different product
© Frontpoint SupportSitemap
FacebookTwitterInstagram