How do I check the connection of automation devices paired with the Display Hub+?

The connection strength for the automation devices connected to the Display Hub+ can be checked at any time to ensure your devices are properly communicating with your panel. For instructions to check the connection strength of automation devices connected to your Display Hub+, follow the steps below:

1. Tap the drop-down menu button to access the settings tray on the Display Hub+.
   
   
2. Tap Settings.
   
   
3. Tap Advanced Settings and enter your master code.
   
   
4. Tap System Tests.
   
   
5. Tap Z-Wave Tests. 
   
   
6. Tap Z-Wave Test.
   
   
7. Tap Run next to each connected automation device. A successful test will result in a Pass and a time stamp will appear. If a device fails, ensure it is plugged in and powered on.