How do I create a rule so my lock is automatically locked or unlocked when the system is armed or disarmed?

From the home screen of Myfrontpoint.com:

  • click on Automation on the left menu.  You will be on the Rules page. 
  • Click the +Add New Rule button at the top right
  • click on Event Triggered Rule.

Enter a name for the rule at the top then fill out the information below:

  • Under Automate My: select locks
  • Under When this event occurs: select whether you want the rule to trigger while arming or disarming
  • Under Perform the actions: if the system is arming select the delay for when the lock will be locked
  • Under Select Devices: select which locks will follow the rule
  • Under During these time frames: select when the rule will be active

Click Save when done.

Was this article helpful?
0 out of 0 found this helpful

Comments

0 comments

Article is closed for comments.