From the home screen of MyFrontpoint.com
- Click on Automation on the left menu. You will be on the Rules page.
- Click the +Add New Rule button at the top right
- Click on Event Triggered Rule
Enter a name for the rule at the top then fill out the information below:
- Under Automate My: select Garage Doors
- Under When this event occurs: select whether you want the rule to trigger while arming or disarming
- Under Perform the actions: if the system is arming select the delay for when the door will be closed
- Under Select Devices: select which Garage Doors will follow the rule
- Under During these time frames: select when the rule will be active
Click Save when done.