How do I mount the Long-Range Door and Window sensor?

To mount the Long-Range Door and Window Sensor, place one piece on the door (or window) itself and one piece on the frame. Ensure that the sensor is set up as follows.

  • The notches on the two pieces are aligned
  • The two pieces are less than 3/4" apart (less than a thumb’s width of each other)
  • The two pieces are flush on the same plane.
  • The door is within 100 ft. of the Control Panel.

mceclip0.png

mceclip1.png

Was this article helpful?
2 out of 3 found this helpful

Comments

0 comments

Article is closed for comments.