How does arming and disarming work with my Keypad?

Away: This button is used for entering arm Away. The key LED at the top of the Keypad will flash red during this mode.

Stay: This button is used for entering arm Stay. The key LED at the top of the Keypad will flash orange during this mode.

  • Press and hold the Stay button for over 3 seconds, release the button and the system will arm Stay without an Entry Delay.

Disarm: This button disarms the system when hit after the 4-digit code. The key LED at the top will flash green during this mode.

Was this article helpful?
1 out of 3 found this helpful

Comments

0 comments

Article is closed for comments.