How do I adjust the volume of my Simon XT Control Panel?

To adjust the speaker volume of the Control Panel, use the steps listed below:

  • Press the Down arrow key until you see System Programming shown on the screen
  • Press the OK button and enter your 4-digit master code and press OK. The screen will display Access Codes
  • Press the Down arrow key until you see Siren Options
  • Press the OK button and the screen will display Piezo Beeps
  • Use the arrow keys to scroll until Speaker Volume shows on the screen
  • Press the OK button and the number setting will begin to flash, and you can adjust as needed. (1 = lowest setting, 8 = highest setting)
  • To return to the home screen, continuously press the Status button on the panel until the screen reverts to Disarmed

Note: The speaker volume refers to any of the spoken word announced by the control panel and is separate from the chimes and/or any other beeps.

Was this article helpful?
10 out of 12 found this helpful

Comments

0 comments

Article is closed for comments.