How do I add the Garage Door Controller to my system?

To add the Garage Door Controller to your system with the Frontpoint app, follow the steps below:

1. Plug in your Garage Door Controller near your security panel, you will move it to its final location after pairing it with your security panel.
2. Log into your account on the Frontpoint app
3. Tap the Menu icon () to open the navigation menu
4. Tap + Add Device
   
   
5. Tap Other Z-Wave at the bottom of the list
   
6. Tap Next and follow the remaining prompts to complete the installation
   • When prompted to trigger the Garage Door Controller, press the button on the top of the device
     
   • If the device does not appear on screen after pressing the programming button, select My Device Won't Add and follow the on screen prompts to clear the device and try again
7. For instructions to physically install the Garage Door Controller in its final location, click here.