1. Frontpoint Support
  2. Products
  3. Products
  4. Environmental Sensors
  5. Flood Sensor

Flood Sensor - Master Guide

Follow

Functionality

The Flood Sensor is used to be notified of early leaks or floods. It can be the key to preventing water damage in a home.

 flood.PNG

Specifications

Manufacturer/Model Number: Resolution RE118

Dimensions: 2.43” H x 2.48” W x 1.17” D

Battery: 2x Panasonic CR2032

Battery Life: ~10 Years          

Weight: 1.34 ounces

Compatibility: Simon XT Panel, IQ Panel, Frontpoint Hub

Operating Temperature Range: 32°F to 120°F

Group/Sensor Type: 38/Water: IQ Flood

Notes:

  • Both titanium probes must be in the same puddle for the Sensor to detect water. The alarm will stop once the probes are dry.
  • Alarms from the Flood Sensor do not cause dispatch but the monitoring station will call and the siren will sound.

Placement Recommendations

We recommend installing the Flood Sensor in a flood-prone area, such as a basement or near appliances (i.e. washing machine, water, heater, sump pump).

Mounting

→ Place the Flood Sensor in the location requiring flood detection with the metal prongs and serial number facing down.

→ The wall clip can be screwed into a surface before slipping the body of the sensor onto it if necessary.  

Was this article helpful?
6 out of 30 found this helpful

Comments

0 comments

Article is closed for comments.

Articles in this section