Long Range Door Window Sensor - Master Guide

Functionality

The Long Range Door Window sensor is great for securing anything that opens or closes. Two pieces (Transmitter and Magnet) are placed parallel next to each other and will report an open signal when the pieces are separated more than ¾”

mceclip0.png

Specifications

Manufacturer/Model Number: Resolution RE101

Dimensions: 3.3” H x 1.4” W x 1.1” D

SKU: Door Window Sensor - Long Range 2.0

Battery: x1 CR123A Battery

Battery Life: 3-5 Years          

Compatibility: Simon XT Panel, IQ Panel, Frontpoint Hub

Operating Temperature Range: 0°F to 120°F

Distance: Will show closed up to ¾” Apart

Mounting

To mount the sensor, place one piece on the door (or window) itself and one piece on the frame. Ensure that the sensor is set up as follows.

  • The notches on the two pieces are aligned.
  • The two pieces are less than 3/4" apart (less than a thumb's width of each other)
  • The two pieces are flush on the same plane.
  • The door is within 100 ft. of the Control Panel.

Click here for more details on mounting a Long Rang Door Window Sensor.

Click here for more details on mounting on a door with molding around the frame.

Click here for more details on mounting on a sliding door.

Click here for more details on mounting on french doors.

Click here for more details on mounting on a double-hung window.  

 

"My sensor doesn't look like this"

Click on the image below that matches your sensor:

mceclip0.png

 

Was this article helpful?
0 out of 0 found this helpful

Comments

0 comments

Article is closed for comments.