Smart Thermostat Battery Replacement Guide

To replace the batteries in the Alarm.com Smart Thermostat:

  • Remove the thermostat from the back plate by pulling the thermostat straight out and off the wall.
  • Take out the existing batteries.
  • Insert the new batteries following the specified polarity markings on the thermostat.

Thermostat_Batteries.jpg

  • Return the thermostat to the wall plate by pressing the thermostat body firmly into the back plate mounted to the wall.

 

Important: Verify that the pins on the body are correctly aligned with the back plate. Failure to do so could cause damage to the thermostat.

Was this article helpful?
0 out of 0 found this helpful

Comments

0 comments

Article is closed for comments.